| 分類 | 種類 |
JAM 緊固系列 (拉爆螺絲)
JAM-S 套筒拉脹式膨脹螺絲 (A2/304 不銹鋼)
Application
• installing pipe bracket, trucking, cable tray and suspended ceilings. Light to medium metalwork, hand rails, signs and gates etc.
Base material
• concrete, brick, masonry and hollow brick (Concrete fcc -30N/mm2)
Installation of JAM-D Drop In Anchor
| Item No. | Description |
Hole Diameter do (mm) |
Thread Size x L (mm) |
Min. Hole Depth hs (mm) |
Tightening Torqure Tinst (Nm) |
Fixture Thickness tfix (mm) |
Base Material Thickness (mm) |
Recommended Tensile Load (kN) |
Recommended Shear Load (kN) |
| 2010606040 | S 8 X 40 A4 | 8 | M6 X 47 | 28 | 8 | 12 | 80 | 1.9 | 3.0 |
| 2010608050 | S 10 X 50 A2 | 10 | M8 X 60 | 32 | 25 | 18 | 100 | 3.8 | 4.4 |
| 2010610060 | S 12 X 60 A2 | 12 | M10 X 69 | 38 | 40 | 22 | 120 | 5.5 | 7.2 |
1. Drill to specified diameter and depth.
2. Clean the hole with blow-out bulb.
3. Push anchor carefully with hand into hole until nut and washer are flush with fixture.
4. Tighten with the wrench to the recommended torque value.